1、Preparation of waterborne epoxy dispersion and its application in 2K
By exploring the curing mechanism, the superior performances of the coatings film prepared by waterborne epoxy dispersion and waterborne epoxy curing agent are presented. The nanometer-sized and stable waterborne epoxy dispersions are achieved by phase inversion method using the reactive emulsifier. 1. Introduction.
2、from China manufacturer
This curing agent is designed for high-performance coatings, offering excellent yellowing resistance and transparency, particularly suitable for medium to high gloss waterborne epoxy topcoats.
3、Waterborne Epoxy Curatives
Waterborne epoxy coatings ofer optimum adhesion and combat the possibility of delamination and subsequent loss of the protective properties of the coating.
4、Banghe 901 Epoxy Curing Agent
Banhe 901 epoxy curing agent is specifically designed to accelerate the curing process of epoxy resins under ambient conditions, thereby improving production efficiency.
5、Synthesis of a waterborne epoxy curing agent based on
In this paper, intermediates were synthesized from polyether triols with epoxy resin E-51 and introduced into the epoxy curing agent by reacting with TETA. This paper focuses on the process of synthesizing the intermediates.
Fabrication of a nonionic self
The 2K waterborne epoxy coating film prepared by the as-prepared nonionic self-emulsifiable curing agent and E51 displayed better thermal property, surface appearance, flexibility, impact resistance, adhesion, and chemical corrosion resistance.
Synthesis of a self‐emulsifiable waterborne epoxy curing agent
The cured film prepared by the self-emulsifiable curing agent and epoxy resin under the optimal mass ratio displayed good thermal property, hardness, toughness, adhesion, and corrosion...
Waterborne Epoxy Curing Agents
With physical characteristics such as excellent abrasion and impact resistance, together with high chemical, water and solvent resistance, Amirez products are the perfect choice for industrial and decorative concrete floor paints.
Waterborne Curing Agent
Waterborne curing agent, Rapid cure under low temperature and offers good adhesion and moderate toughness film, Civil engineering, Concrete coatings.
PRODUCTS
JH-BX70 is a water-based epoxy hybrid resin developed for water-based epoxy self-drying anti-corrosion paint.
In today's industrial sector, with the increasing stringency of environmental regulations and rising consumer demands for health and safety, traditional solvent-based epoxy curing agents are gradually being replaced by waterborne epoxy curing agents. As a company dedicated to the research and application of high-performance materials, Banghe has introduced a waterborne epoxy curing agent that stands out for its unique performance advantages, making it a preferred material in numerous engineering fields.
From an environmental perspective, waterborne epoxy curing agents are unquestionably a green chemical product. Using water as a solvent, they significantly reduce emissions of volatile organic compounds (VOCs), lowering air pollution and minimizing risks of soil and water contamination. In the pursuit of sustainable development, such eco-friendly products hold immense market potential and social value.
Compared to traditional solvent-based epoxy curing agents, waterborne variants offer several key performance benefits. For instance, they exhibit stronger adhesion, better water resistance, superior aging resistance, and faster curing speeds. These advantages make them particularly valuable in applications requiring rapid curing and minimal environmental impact, such as electronic encapsulation, automotive manufacturing, and other specialized settings.
Additionally, waterborne epoxy curing agents boast excellent flexibility and impact resistance, enabling reliable protection in scenarios subjected to external forces, such as bridges and architectural structures. Their absence of harmful substances also expands their applicability to food safety and medical device industries.
Despite these advantages, the development and adoption of waterborne epoxy curing agents face challenges. Firstly, their relatively higher cost limits widespread use in price-sensitive markets. Secondly, while their performance is exceptional, stability under extreme conditions—such as high or low temperatures—needs improvement, requiring meticulous consideration during design and application.
To address these challenges, Banghe continues to invest heavily in research and development, aiming to create high-performance, cost-effective waterborne epoxy curing agents. The company has also fostered close collaborations with domestic and international research institutions and universities to advance technological innovation in this field.
Looking ahead, waterborne epoxy curing agents hold promising prospects. As global environmental awareness grows and new material technologies progress, these agents are expected to see broader applications, particularly in high-tech sectors like new energy, biopharmaceuticals, and aerospace. This shift will not only foster a greener, healthier living environment but also generate significant economic value for businesses and individuals.
Banghe’s waterborne epoxy curing agents, with their outstanding environmental performance, mechanical properties, and versatility, are becoming indispensable in industrial domains. Moving forward, we have every reason to believe that waterborne epoxy curing agents will continue to lead industry trends through innovation and technical excellence.
