1、DB35/T 1906
本标准规定了高渗透改性环氧树脂防水防腐涂料（以下简称涂料）的要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于输水管道、地铁管片和房屋建筑等建设工程非外露部位使用的高渗透改性环氧树脂防水防腐涂料。 涂料沿混凝土表层的毛细管、微孔隙和微裂纹自外而内渗入混凝土内一定深度，具有填充和封闭孔隙的性能。 以具有高渗透性的环氧树脂和固化剂为主要组分，固化成膜后具有防水和防腐功能的反应型涂料。 包括固体含量、渗透性、初始粘度、表干时间、实干时间、可操作时间、柔韧性、粘结强度、涂层抗渗压力、耐化学介质、抗冲击性等。 涂料沿混凝土表层的毛细管、微孔隙和微裂纹渗入混凝土内一定深度的能力。 涂层在受到冲击时抵抗 …
2、高渗透性环氧树脂防水防腐涂料的制备及性能
A permeable epoxy coating was prepared through a combination of bisphenol-A epoxy resin （E51）， furfural， acetone phenolic modified amine， 2，4，6-tris（dimethylaminomethyl）phenol （DMP-30） and other additives， and its reaction mechanism was analyzed.
3、高渗透性环氧树脂防水防腐涂料的制备及性能
摘要 以双酚A型环氧树脂 (E51)、糠醛、丙酮、酚醛改性胺、2,4,6-三 (二甲氨基甲基)苯酚 (DMP-30)为主要原料,制备了一种高渗透性环氧树脂防水防腐涂料。
4、Permeable Modified Resin Anti
In this work, we report a simple, scalable, and inexpensive approach for the preparation of a novel amino-functionalized GO that is modified by 2,5-diaminobenzenesulfonic acid (DGO), and we use it as a functional filler for a waterborne epoxy resin coating to improve its anticorrosive performance.
Two Component High Permeability Modified Resin Epoxy as Injection
Two Component High Permeability Modified Resin Epoxy as Injection Grouting Fluid for Wall Reinforcement Waterproof - Epoxy Resin and Liquid Epoxy Resin
High Penetration Modified Epoxy Resin
High Penetration Modified Epoxy Resin-Eco-Friendly Waterproof Grouting Liquid for Tile Modern Wall Structural Reinforcement| Alibaba.com
Preparation and Performance of High Permeable Epoxy
The results indicated that the BYK⁃333⁃modified coating exhibited an optimum film⁃forming ability and good permeability. The coating achieved bonding strength of 4. 5 and 3. 6 MPa on the dry base...
Epoxy Modified Type
This product has the heat resistance of silicone resin and corrosion resistance and adhesion of epoxy resin. This is a standard product of epoxy resin modified series.
Preparation and properties of high performance epoxy resin
The results show that proper amount of epoxy resin can increase the viscosity between aggregate and mortar, and improve the bonding strength, so as to improve the mechanical properties, water permeability and frost resistance of modified permeable concrete.
热诱导熔接聚氨酯/聚二甲基硅氧烷防水透湿膜的制备及其
为提高纳米纤维膜的防水、透湿和力学性能,在聚氨酯 (PU)纺丝液中添加无氟疏水剂聚二甲基硅氧烷 (PDMS),采用静电纺丝法制备静电纺PU/PDMS防水透湿膜,并在此基材上采用静电喷雾法沉积PU/PDMS微球制备静电喷雾PU/PDMS防水透湿膜;利用热诱导工艺分别对静电纺PU/PDMS和静电喷雾PU/PDMS防水透湿膜进行热处理改性,研究了热处理温度和时间对其形貌、孔径分布、防水性能、透气透湿性能及力学性能的影响,并对其影响机制进行分析。
In the fields of architecture and industry, the performance of materials directly determines the success or failure of engineering projects. Among these, waterproof performance is a critical indicator for evaluating material quality. Shinake’s SNK02 permeable modified epoxy resin has become a top choice for numerous projects due to its excellent waterproof properties and exceptional durability. This article provides an in-depth analysis of SNK02 permeable modified epoxy resin, covering its composition, performance characteristics, application examples, and highlighting its unique advantages and significance in practical use.
1. Ingredient Analysis
SNK02 permeable modified epoxy resin is a composite material primarily composed of epoxy resin, curing agents, fillers, thinners, and additives. Epoxy resin, as the core component, ensures strong adhesion and mechanical strength. Curing agents accelerate the hardening process, enabling rapid formation of a durable coating. Fillers and thinners enhance flexibility, impact resistance, and cost-effectiveness, while additives (e.g., accelerators and stabilizers) ensure stability during application and usage.
2. Performance Characteristics
2.1 Excellent Waterproof Performance
SNK02 permeable modified epoxy resin delivers superior waterproofing, maintaining long-term efficacy in harsh environments by effectively blocking moisture penetration. This capability stems from its optimized internal structure, which restricts water molecules from passing through the material surface.
2.2 Exceptional Durability
Beyond waterproofing, SNK02 exhibits remarkable durability. It resists cracking, peeling, and degradation over extended use, preserving its physical and chemical properties. Its high weather resistance and chemical resistance make it suitable for extreme conditions, including humidity, acids, and alkalis.
2.3 Environmentally Friendly
SNK02 is manufactured under strict environmental standards, complying with national eco-regulations and posing no harm to human health or the environment. Additionally, its recyclability reduces project costs and minimizes environmental impact.
3. Application Fields
SNK02’s outstanding performance has led to widespread adoption across diverse sectors:
- Architecture: Roofs, walls, basement waterproofing.
- Transportation: Bridges, tunnels, airport runway reinforcement.
- Industrial Use: Equipment, pipelines, storage tank anticorrosion.
- Agriculture: Irrigation and water conservancy infrastructure.
4. Success Story
A notable example is its application in a metropolitan subway project. SNK02 was used for waterproofing the metro stations’ structural layers. The material ensured safe operation, extended service life, and earned unanimous praise from clients and regulatory bodies due to its durability and eco-friendliness.
Shinake’s SNK02 permeable modified epoxy resin stands out for its waterproofing excellence, durability, and environmental benefits. As technological advancements raise engineering quality standards, SNK02 is poised to play an increasingly vital role in future construction projects.
