1、Preparation and Properties of Waterborne Epoxy Curing Agents Based on

Finally, the chain reaction of RAE with diethylenetriamine (DETA) and glycidol was performed to obtained the waterborne epoxy curing agents based on castor oil.

2、Preliminary Results on Preparation and Performance of a Self

The infrared absorption spectra of E20, EP1K, and the water-based epoxy curing agent were compared and analyzed. The coating properties of the waterborne epoxy varnish, which was based on water-based epoxy curing agents to emulsify and cure the resin E44, were systematically tested.

3、Synthesis of a waterborne epoxy curing agent based on

Polyether polyols can improve the performance of waterborne epoxy curing agent. In this paper, intermediates were synthesized from polyether triols with epoxy resin E-51 and introduced into the epoxy curing agent by reacting with TETA.

Jinhua's Acquisition of Epoxy Curing Agents: A Win

Jinhua’s acquisition of epoxy curing agents reduces pollution and fosters industrial upgrades, propelling green chemical development. Realizing this strategy requires collaboration among government, businesses, and society to build a sustainable industry and contribute to a “Beautiful China.”

Stable waterborne epoxy resins: Impact of toughening agents on coating

The subsequent discussion focuses on the dynamic mechanical properties of the waterborne epoxy cured films and the low-temperature film-forming capabilities of the waterborne epoxy varnishes; it is concluded with an assessment of the application performance of the waterborne epoxy metal primers.

Jinzhong Waterborne Epoxy Resin Curing Agent

Compared to traditional solvent-based epoxy curing agents, waterborne epoxy curing agents reduce fire hazards during application and minimize health risks to workers.

Research Progress in Waterborne Epoxy Resin Curing Agent

The effect of the compatibility and reactivity of waterborne epoxy curing agents on the curing films and its control methods were also discussed，which provided guidance for selection of suitable curing agents and development of waterborne epoxy curing agent with excellent performance.

Synthesis and Characterization of Waterborne Epoxy Curing Agent

A self-emulsified waterborne epoxy curing agent of the nonionic type was synthesized by Zhou et al.[9] using diglycidyl ether of polyglycol (DGEPG), triethylene tetramine (TETA) and liquid epoxy resin (EPON828) as raw materials, which has good property of emulsi-fying liquid epoxy resin.

Synthesis of a self‐emulsifiable waterborne epoxy curing agent

In order to overcome the brittleness of cured epoxy resin film, a waterborne epoxy curing agent containing soft segments com-ponents, which can cure at low temperature, was synthesized...

Synthesis and Characterization of Waterborne Epoxy Curing Agent

In this work, a novel waterborne epoxy curing agent modified by silane was prepared using 3-glycidoxypropyltrimethoxysilane ( GPTMS) and C12 acyclic glycidyl ether (AGE) as a termination agent of adduct, which was synthesized by triethylene tetra- mine (TETA) and liquid epoxy resin (E-51). The structure of the curing agent was characterized.

Jinhua Waterborne Epoxy Curing Agent: The Perfect Combination of Environmental Protection and Performance

In today’s society, with the continuous enhancement of environmental awareness, people are increasingly demanding in terms of environmental protection, particularly in the construction sector, where the selection of building materials is handled with utmost caution. As an eco-friendly material, the Jinhua Waterborne Epoxy Curing Agent has garnered widespread attention due to its unique advantages. This article delves into the characteristics, applications, and environmental performance of the Jinhua Waterborne Epoxy Curing Agent, aiming to provide readers with a comprehensive and objective understanding.

I. Introduction to Jinhua Waterborne Epoxy Curing Agent

The Jinhua Waterborne Epoxy Curing Agent is a water-based epoxy resin curing agent characterized by excellent chemical stability, alkali resistance, and acid resistance. Compared to traditional solvent-based epoxy curing agents, it significantly reduces volatile organic compound (VOC) emissions, making it more environmentally friendly. Additionally, it exhibits strong adhesion and flexibility, effectively enhancing the performance of coatings.

II. Characteristics of Jinhua Waterborne Epoxy Curing Agent

1. Low VOC Emission: By using water as a solvent, the Jinhua Waterborne Epoxy Curing Agent substantially reduces VOC emissions, minimizing environmental pollution. Its VOC emissions can be reduced to half or even lower compared to traditional solvent-based products.

2. Superior Environmental Performance: Due to its low VOC emissions, the curing agent poses no harm to the environment or human health during use. It also reduces atmospheric pollution, contributing to improved air quality.

3. Strong Adhesion: The curing agent demonstrates excellent adhesion to various substrates, including wood, metal, ceramics, and more. This feature expands its applications in construction, furniture, and craft industries.

4. Good Flexibility: With remarkable flexibility, the curing agent maintains stable performance under complex application conditions. This prevents cracking, bubbling, and extends the lifespan of coatings.

5. Wide Applicability: Suitable for all types of epoxy coatings, including primers, intermediate coats, and topcoats. Its versatility makes it widely applicable in construction, furniture, and craft industries.

III. Applications of Jinhua Waterborne Epoxy Curing Agent

1. Construction Sector: Used in the production of architectural coatings, waterproof coatings, fire-resistant coatings, etc. It provides exceptional adhesion and flexibility, improving coating performance.

2. Furniture Manufacturing: Applied in wood furniture finishing, it enhances surface hardness and wear resistance while delivering aesthetic appeal.

3. Craft Production: Widely used in coating ceramics, glass, metals, and other materials, improving decorative value and durability.

IV. Environmental Performance of Jinhua Waterborne Epoxy Curing Agent

The production process generates minimal wastewater, exhaust gases, and residues, reducing environmental impact. Additionally, it can be combined with other eco-friendly materials to further enhance sustainability.

The Jinhua Waterborne Epoxy Curing Agent stands out for its low VOC emissions, superior environmental performance, strong adhesion, flexibility, and broad applicability. It has become a critical material in construction, furniture, and craft industries. As environmental awareness continues to rise, the Jinhua Waterborne Epoxy Curing Agent is poised to play an even greater role in future development.